Direct cooling block ice machine is a new large block ice making technology in recent years. The machine has a high degree of automation and more stable performance. It is the trend of the ice making industry in the future. It has many advantages over traditional ice making technology.

Advantage 1: Energy saving

Electricity per ton of ice: about 60 kWh, which is more than 30% more energy-efficient than traditional salt water ice making.

Advantage 2: High degree of automation

The direct cooling block ice machine can automatically control the ice making, adding water and deicing. Unlike traditional salt water ice making, manual and crane operations are required.

Advantage 3: Fast freezing

The same ice cube saves 3-6 hours of freezing time than salt water. The average freezing temperature of the salt water block ice machine is generally around -10 degrees, while the direct cooling block ice machine

The freezing temperature is generally around -20 degrees, so the freezing time is saved.

Advantage 4: Low operating cost

The direct cooling block ice machine does not need salt water and saves labor. In addition, the mold is made of aluminum alloy and has a long service life. In the traditional salt water, the salt is purchased manually and the ice is made.

All aspects such as electricity costs are higher than direct cooling block ice machines

Advantage five: saving civil construction costs

The direct cooling block ice machine occupies a small area, and the ice can be made by connecting water and electricity on site, which greatly saves time and civil construction costs.

Advantage six: hygiene

The direct cooling block ice machine is not like the brine type. The factory is humid and messy. The ice produced by the direct cooling block ice machine can meet the edible standard.

Advantage seven: convenient transportation

The direct cooling block ice can be transported and removed as a whole.

Advantage eight: long service life

Since the direct cooling block ice machine is not corroded by salt water, the machine can be used for a long time without changing the ice mold, and its performance is more stable.