Guangdong Xueyuan Ice Making Equipment Co., Ltd.

I don't know the configuration of the ice machine, and don't know what kind of machine is configured well.

Classification:

Author:

Source:

Release time:

2016-07-25

From the structural point of view, the ice maker can be basically divided into: compressor, evaporator, condenser, expansion valve, electronic control component, equipment frame

Compressors are Bitzer, come to Fukang, Hanzhong, Fusheng is more common, Bitzer is from Germany, come to Fukang is Italy, Hanzhong and Fusheng, there are many other brands of compressors, it takes a little time, Basically, you can understand clearly.

Evaporator: The evaporator of the block ice machine is the ice mold, which is made of aluminum alloy, and the size can be customized. The production process is similar.

Condenser: There are many manufacturers of condensers. There are evaporative cooling, water cooling, and air cooling. In the north, it freezes in winter. It is recommended to use evaporative cooling or air cooling. In the south, evaporative cooling or water cooling can be used.

Expansion valve: Danfoss and Emerson are more well-known, domestic brands are less

Electrical components: high-end Mitsubishi, Schneider, Siemens, domestic ones generally use Chint.

Equipment frame: Generally, it depends on the specifications of steel and the thickness of the material. The surface treatment is generally paint. The better one is hot-dip galvanizing. Stainless steel is the best, but the cost is too high and it is rarely used.